Machinery & Hardware, Chemical, Construction, Mineral Industry, Stone Industry
Compressive Strength (For Crushing)
Non-Explosive, Non-Inflamable, Brittle Materials
After-Sales Service Provided
Engineers Available to Service Machinery Overseas
Spare Parts Supply
for Whole Year
Hammer crusher: Hammer crusher is suitable for crushing medium hard materials such as limestone, slag, coke, coal and other materials in cement, chemical, electric power and metallurgy industries. [feed granularity] : 100-300 (mm) [production capacity] : 3-30(t/h) [application field] : used for crushing brittle materials with low compressive strength not exceeding 120Mpa. [adaptive materials] : coal, limestone, gypsum, and soft refractory materials. The applicability of strong crushing ratio, high production efficiency and strong applicability, can adjust the required granularity according to customer requirements. There is no requirement for the moisture content of the material, and there is no problem of pasting sieve plate. There is no problem that the material cannot be discharged in time and repeated to be broken. The structure seal of the hammer broke the dust pollution in the crushing plant and the leakage of the body. Simple structure design, compact design, compact structure, less vulnerable parts, convenient maintenance, etc., are upgraded products. The technology advanced bearing box is made of cast steel parts and fixed with four screws. The hammer head adopts new process casting, which has wear-resisting and impact resistance. The working principle of hammer crusher is mainly composed of casing, rotor, bearing parts, such as iron and grate chassis consists of two parts, steel plate welding and become, after the rest of the parts with bolt connection into a whole. The inner casing has high manganese steel lining and can be replaced after wear. The hammer crusher is equipped with an array rule distribution hammer on the spindle and a rotor with a rotary table and a hammer shaft. By motor, v-belt drive main shaft, so that the rotor rotation, the hammer is generated by the centrifugal force when rotating around open, large pieces of material from the inlet into the crushing chamber, is the hammer of high-speed movement. The broken and qualified materials are discharged from the cracks in the lower part, and the unqualified ones are left in the broken cavity, and are repeatedly used by the hammer and the hammer, until they can be discharged.